|
Post by Bentley on May 21, 2014 7:49:32 GMT 10
4 1/2 inches of rain come in one night after your pour and you pretty much do nothing...I get this...
|
|
|
Post by Bentley on May 21, 2014 7:50:19 GMT 10
|
|
|
Post by Bentley on May 21, 2014 7:50:55 GMT 10
|
|
|
Post by Bentley on May 21, 2014 7:52:11 GMT 10
Oh well! We are back, and I get to take photos each day, ask the workers stupid questions and see how it progresses...maybe as it goes along, I will clue in!
|
|
|
Post by chrisg on May 21, 2014 9:51:33 GMT 10
Not a builder although most of the family are so Golly is likely to be the best commentator but on a couple of houses I've done laboring on to help out that had a crawl space a slab was laid under the wet areas. Not sure if that is what you are seeing though without knowing the floor layout relative to the pics. Cheers
|
|
|
Post by Bentley on May 21, 2014 10:28:56 GMT 10
What I found out is, the "gap" in photo 1 & 3 will be the patio and front landing...figured the patio was gonna be bigger!
|
|
|
Post by Bentley on May 23, 2014 7:54:38 GMT 10
|
|
|
Post by Bentley on May 24, 2014 6:18:48 GMT 10
|
|
|
Post by golly on Jun 1, 2014 17:24:32 GMT 10
good to see you are back home so oversee this build lol i mean to post pics
i like the formwork with brickwork pattern hyspan joists are use here in oz they are light weight and uniform size and super strong once in configoration
1 question why the gravel under the house?
are they laying plywood or particle board flooring
is it true you yanks prefer to screw than nail?
|
|
|
Post by smokey on Jun 1, 2014 21:56:02 GMT 10
Golly, my joint has hyspan with pressed metal section on the second story floor, The platform flooring is glued and screwed. When I used to build factory mezzanines it was always glue and screw. Only nails I've ever used were gal twisty nails on decking.but I'd still use a pollyurathain adhesive. The pics are interesting arnt they. I wondered what that form work was with the brick pattern until it became clear. I also wonder about the gravel other than just to make some sort of thermal layer ?? Or just a clean layer for tradies to work on. Or maybe some sort of damp sinc?
|
|
|
Post by chrisg on Jun 2, 2014 11:11:47 GMT 10
The gravel will likely be to add thermal mass, not able to see if any underfloor heating is going in, could be, where Bentley is building is a lovely part of the world but can get very chilly. Apart from hanging pictures I don't think I or any of my builder family really use nails for much of anything, screws are so much better. I recall way back dad bought a nailgun for site work and very quickly put it under lock and key, dangerous things It's a massive generalisation but the quality of building work in the US, Canada and UK tends to be of a much higher standard than here in Australia from my and my families experience - WA is especially bad from the places I've owned here. It could almost persuade me to owner-build - almost I'm sure that is not true of builders like Golly but the WA attitude seems to be build for a finite life, knock it down, build new, all the value being in the land. Until I came to Australia apart from briefly living in one of dad's spec houses I'd never lived in a house less than 150 years old, try that in Australia My current place is maybe 45 years old, built pretty well, much better than the last place that was 16 years old - sad but true. Cheers
|
|
|
Post by golly on Jun 3, 2014 16:43:02 GMT 10
is the rim board up above the top of the joists for a structural reason ie tie down for wind loads rim board nailed to bottom plate of the external wall
|
|
|
Post by smokey on Jun 3, 2014 17:46:55 GMT 10
Looks like wind bracing onto the leger, Rim boards not doing anything but brace the hyspan. So they bolted the ledger down if booker rod or bent over the rio if it is rio. Man Ide love to visit for a close up looksee
|
|
|
Post by Bentley on Jun 5, 2014 0:27:16 GMT 10
|
|
|
Post by Bentley on Jun 5, 2014 0:28:20 GMT 10
|
|